15% off for 2x Hardware Kits - Hardware components only (NO PRINTED PARTS aside from the plunger) - 3D print and assemble yourself with the files linked below
Dispatches in 1-4 business days with fast and tracked shipping
Couldn't load pickup availability
2x Hardware Kits - Hardware components only - no printed parts. The only printed part included is the plunger - done in PETG with a TPU face to protect against ware. This hardware kit can make any of the 9 possible configurations with different muzzle and handguard variants, just choose the barrel length for your desired configuration (see image 4). All Zinc .50 kits include 9x BCAR pins and bearings. The included mag springs can make 4x 7 dart or 2x 8-13 dart magazines
The Zinc .50 is a high-powered, mag fed (7-13 dart capacity) foam dart springer pistol blaster capable of up to 250 FPS muzzle velocity for 205mm barrel configurations, and up to 230 FPS for 160mm barrel configurations. See images for further details.
Please note: This blaster has a large spring with a somewhat heavy prime weight. Said spring may present danger if the blaster is not assembled, used, or cared for correctly. This is your responsibility. Information on correct assembly, use and care can be found in the assembly guide linked above. If you are looking for a blaster with a lighter prime and less powerful spring: check out the more compact Znc Aus.
IMPORTANT NOTE - PRINT IN BRIGHT COLOURS! Due to it's design this blaster must be printed in bright colours and with an orange tip to differentiate it from a real firearm.
Care and safety: Print in bright colours and use in responsible locations/settings. Do not leave the blaster outside under sunlight or in a car that may get hot when not in use. Do not leave the blaster primed when not in use as this will fatigue the main spring and other parts. Use responsibly. Do not aim at eyes or face. Eye protection for skirmishing is essential. Not recommended for use by young children.
