Znc Aus Completed Dart Blaster

Completed blaster - A functional Znc Aus

Please note that completed blaster orders are partially disassembled into a few main components after being tested for functionality to avoid potential customs issues. Reassembly is quick and easy (about 10 minutes), all required tools are included, and there is a section in the assembly guide for reassembly of completed blaster orders (see the index). All completed blaster parcels are declared as toy blasters and include a note stating that the blaster is a toy foam dart blaster and identifying it as the Zinc should it be opened for inspection. No customs incidents have been encountered thus far. Although these precautions are taken, BM Print Shop is not liable for any customs issues that may arise. 

The original print files are available here. They are linked here as a resource but are not required for this completed blaster, as all printed parts are included.

Cosmetic Part Variants print files and images can be found here. They are linked here as a resource but are not required for this completed blaster, as all printed parts are included.

Assembly guide can be found here

Included:

• Znc Aus Blaster
• 1x 7-Dart Magazine
• 1x 10-Dart Magazine
• 1x Dropper bottle of spare lubricant oil
  

The Znc Aus is a high-powered, mag fed (7-12 dart capacity) springer pistol blaster capable of up to 200FPS muzzle velocity. It is available in 3 variants with different muzzle configurations: Compact, Integrated BCAR, or Extended Barrel with External BCAR (200FPS was achieved with the Extended Barrel  with External BCAR variant). 

The Znc Aus is based on the Znc by Misplaced Moose, and is modified and sold with his permission. Note: Like the Znc, the Znc Aus is an unofficial descendant of the Zinc 2.0 blaster. Frontline Foam in the USA is the only approved distributor for the official Zinc 2.0. Standout changes and additions include an optional handguard and a variant with a longer barrel and an external 'suppressor' BCAR.

Hardware changes include a tighter-toleranced aluminum plunger tube over the original polycarbonate one, refined closed-end springs for all springs to fix issues of the original Zinc such as the stiff catch and weak mag release, double O-rings on all seals, lubricant oil included, plastic tapping screws replacing machine screws with nuts (caused part splitting or the nuts would turn in place, making removal impossible), and more. Additionally, all printed parts have had their design and/or tolerances modified in the interest of performance, ease of assembly, ergonomics, and aesthetics. See images for further details. 

Darts: Darts are not included. This blaster takes half length darts. Worker Gen3+ or Worker Bamboo half-length darts are recommended.

Disclaimer, care, and safety: all blasters, parts, and products sold by BM Print Shop are used at your own risk and should only be assembled and used by an adult or with close adult supervision. Improper assembly, use, or modification has the potential to result in injury. Read the disclaimer warning on the first page of the assembly guide carefully before assembly and use. Print in bright colours and use in responsible locations/settings. Do not leave the blaster outside under sunlight or in a car that may get hot when not in use. Do not leave the blaster primed when not in use. Use responsibly including in responsible settings. Do not aim at eyes or face. Eye protection is essential for skirmishing.