3 Blaster Hardware Kit Bundle - Zc Aus, Znc Aus, Zinc .50

3x Hardware kits - collect the full set - hardware components only - no printed parts. The only printed part included is the plunger - done in PETG with a TPU face to protect against ware.

See the individual product pages for details on each blaster:

• Zc Aus hardware kit product page
  • Zc Aus Print Files
  • Zc Aus Print and Assembly Guide
• Znc Aus hardware kit product page
  • Znc Aus Print Files
  • Znc Aus Print and Assembly Guide
• Zinc .50 hardware kit product page
  • Zinc .50 Print Files
  • Zinc .50 Print and Assembly Guide

IMPORTANT NOTE - PRINT IN BRIGHT COLOURS! Due to their design these blasters must be printed in bright colours and with an orange tip to differentiate them from real firearms.

Disclaimer, care, and safety: all blasters, parts, and products sold by BM Print Shop are used at your own risk and should only be assembled and used by an adult or with close adult supervision. Improper assembly, use, or modification has the potential to result in injury. Read the disclaimer warning on the first page of the assembly guide carefully before assembly and use. Print in bright colours and use in responsible locations/settings. Do not leave the blaster outside under sunlight or in a car that may get hot when not in use. Do not leave the blaster primed when not in use. Use responsibly including in responsible settings. Do not aim at eyes or face. Eye protection is essential for skirmishing.